README
Control your EPSON projector connected via USB or serial cable to your local computer or a remote machine.
Preparation
Install package uucp on the machine that is connected to the projector.
Installation
npm i -g escvp21
Usage
Usage: escvp21 [options] <connect-command>
Options:
-h, --help output usage information
-V, --version output the version number
-m, --model <model-name> specify projctor model. Use "auto" to query REST API based on serial number. [auto]
-p --power <on or off> Turn on or shutdown projector
Auto-Detect Projector Model
If you specify "auto" as model name (that's the default), the program will use a web service (see below) to lookup the projector's model name by its serial number. Privacy notice: The unique serial number of the device in question will be sent over the network as part of a URL via https.
If you prefer to query the web service manually or the host computer where the projector is connected to does not have Internet access, you can use the following command:
curl "https://www.epson.co.uk/gb/en/viewcon/corporatesite/modules/warranty_details/search?ajax=true&serial=<SERNO>"
Examples
Power up projector connected to serial port ttyUSB0 on local machine:
escvp21 "cu -l /dev/ttyUSB0 -s 9600" --power on
Shut down projector connected to serial port ttyUSB0 on remote machine conema.local:
escvp21 --power off "ssh -e none projectionist@cinema.local \"cu -l /dev/ttyUSB0 -s 9600\""
Example Output
$ escvp21 "ssh -e none projectionist@cinema.local \"cu -l /dev/ttyUSB0 -s 9600\"" --power on
.response of SNO?: SNO=SPGF340554L
Projector identified as EH-TW8100
response of PWR ON:
response of LAMP?: LAMP=574
response of LUMINANCE?: LUMINANCE=01
response of BRIGHT?: BRIGHT=125
response of CONTRAST?: CONTRAST=125
response of TINT?: TINT=126
response of HREVERSE?: HREVERSE=ON
response of VREVERSE?: VREVERSE=OFF
response of MSEL?: MSEL=01
response of ASPECT?: ASPECT=00
response of PWR?: PWR=02
response of SOURCE?: SOURCE=30