homebridge-mqtt-tasmota

This is an all-in-one homebridge plugin to control various tasmota devices via MQTT.

Since Tasmota MQTT topics are well known for a given device type, all the MQTT topics will be computed according to the device name (%topic% in the tasmota settings).

Breaking change on 0.4.0

To enable a nice homebridge config UI, only one accessory type has to be defined. So, now there is only one mqtt-tasmota accesory along with a new type property.

For instance, a previous accessory definition was like

        {
            "accessory": "mqtt-tasmota-blinds",
            "name": "Living Room Blinds",
            "url": "mqtt://192.168.0.3",
            "topic": "living_room_shutter",
            "index": "1"
        },

and should be changed to

        {
            "accessory": "mqtt-tasmota",
            "type": "blinds",
            "name": "Living Room Blinds",
            "url": "mqtt://192.168.0.3",
            "topic": "living_room_shutter",
            "index": "1"
        },

Tested with

• Tasmota 9.3.1 Kenneth, 9.4.0 Leslie, 9.5.0 Michael, 10.1.0 Noelle
• Sonoff devices :
  • RFR3
  • MINI
  • POWR2
  • iFan03
  • S26
  • 4CHPROR2
  • 433 RF Bridge (with smoke alarms)
  • T1 (dual switch)
• Homemade ESP8266 Temperature sensor

TODO

• for malfunctioning devices, get their state at startup and show them as broken
• create a platform API and enable auto-discover of all tasmota devices
• add support for power switch
• add logs for sensors (temp, hum, watt, ...)

Installation

If you are new to Homebridge, please first read the Homebridge documentation. To install the plugin use:

sudo npm install homebridge-mqtt-tasmota -g

Common Configuration settings

config.json example (for blinds, switches, humidity, smoke, doorbell, temp, and fan)

{
    "bridge": {
        "name": "homebridge",
        "username": "CC:22:3D:E3:CE:30",
        "port": 51826,
        "pin": "031-45-154"
    },
    "accessories": [
        {
            "accessory": "mqtt-tasmota",
            "type": "blinds",
            "name": "Living Room Blinds",
            "url": "mqtt://192.168.0.3",
            "topic": "living_room_shutter",
            "index": "1"
        },
        {
            "accessory": "mqtt-tasmota",
            "type": "switch",
            "name": "Lounge",
            "url": "mqtt://192.168.0.3",
            "topic": "lounge_switch"
        },
        {
            "accessory": "mqtt-tasmota",
            "type": "switch",
            "name": "Dual Switch 1",
            "url": "mqtt://192.168.0.3",
            "topic": "dual_switch",
            "index": "1"
        },
        {
            "accessory": "mqtt-tasmota",
            "type": "switch",
            "name": "Dual Switch 2",
            "url": "mqtt://192.168.0.3",
            "topic": "dual_switch",
            "index": "2"
        },
        {
            "accessory": "mqtt-tasmota",
            "type": "smoke",
            "name": "Kitchen Smoke",
            "url": "mqtt://192.168.0.3",
            "topic": "smoke_alarm_kitchen"
        },
        {
            "accessory": "mqtt-tasmota",
            "type": "doorbell",
            "name": "Main Door Bell",
            "url": "mqtt://192.168.0.3",
            "topic": "door_bell"
        },
        {
            "accessory": "mqtt-tasmota",
            "type": "humidity",
            "name": "Lounge Humidity",
            "url": "mqtt://192.168.0.3",
            "topic": "lounge_temp"  
        },
        {
            "accessory": "mqtt-tasmota",
            "type": "temperature",
            "name": "Lounge Temp",
            "url": "mqtt://192.168.0.3",
            "topic": "lounge_temp"
        },
        {
            "accessory": "mqtt-tasmota",
            "type": "fan",
            "name": "Fan",
            "url": "mqtt://192.168.0.3",
            "topic": "lounge_fan"
        }
    ],

    "platforms": [
        {
            "platform": "mqtt-tasmota",
            "name": "mqtt-tasmota",
            "url": "mqtt://192.168.0.3"
        }
    ]
}

Supported accessories

One single mqtt-tasmota type is supported, with type as one of:

• blinds
• doorbell
• fan
• humidity
• smoke
• switch
• temperature

Common Mandatory settings

Variable	Description	Example
accessory	Name of the accessory plugin.	mqtt-tasmota
type	Type of the accessory	blinds
name	Name for your device.	Living Room Blind
url	MQTT broker URL.	mqtt://192.168.0.10:1883
topic	MQTT topic part related to the device. (will be used to compose actual tasmota topics)	my_blind

Common Optional settings

Variable	Description	Example
username	Your MQTT Broker username	username
password	Your MQTT Broker password	password
manufacturer	Manufacturer of your device	DIY
model	Model of your blind.	Prototype
serialNumberMAC	Serial number of your device.	01.01.01.01

Dedicated Switch settings

Optional settings

Variable	Description	Example	Default Value
index	The switch index in tasmota (could be 1 to 4, default blank)	1

Dedicated Blinds and Shutters settings

Mandatory settings

Variable	Description	Example
index	The shutter index in tasmota (could be 1 to 4)	1

Optional settings

Use these variables to override the computed topics (topic + index).

Variable	Description	Example	Default Value
shutterName	Shutter name as seen in tasmota.	Shutter1	Shutter{index}
teleTopic	Telemetry topic position from 0 to 100.	/tele/my_blind/SENSOR	/tele/{topic}/SENSOR
commandTopic	Topic to set position from 0 to 100.	/cmnd/my_blind/ShutterPosition1	/cmnd/{topic}/ShutterPosition{index}
resultTopic	Topic to get position from 0 to 100.	/stat/my_blind/RESULT	/stat/{topic}/RESULT

Contributing

Adding support for a new device type should be as simple as add a new device_type.js file in the src directory Then:

• add the device type in the main src/ìndex.js file
• add a dedicated section in the config.schema.json file is necessary