ranged-overflow

Provides ranged overflow for numbers, for example (minimum 1 and maximum 3 with value 5 would be 2)

Usage no npm install needed!

<script type="module">
  import rangedOverflow from 'https://cdn.skypack.dev/ranged-overflow';
</script>

README

Ranged Overflow

A overflow function that overflows a value inside a range.

But wait, if you install now you'll get a complementary clamp and a within, I'll even throw in a outside too.

WHAT is there even more? Yes, the library comes with a valid and an assert functions for validation of parameters.

If you haven't installed this library yet, then you should check out the ASCII art and benchmarks below. Don't wait, install now.

Install

It's that easy.

npm install ranged-overflow

# For your project

npm install --save ranged-overflow

# For development purposes

npm install --save-dev ranged-overflow

Don't have NodeJS yet? No problem, and then n.

Use

Import it ...

import {
    overflow,
    clamp,
    within,
    outside,
    valid,
    assert,
} from 'ranged-overflow'

...

Or require it, the old fashion way ...

var ranged = require('ranged-overflow')

var overflow = ranged.overflow
var clamp = ranged.clamp
var within = ranged.within
var outside = ranged.outside
var valid = ranged.valid
var assert = ranged.assert

...

Functions

The library consist of functions that calculate a value using a range (min + max), check boundaries, and throw exceptions.

All function take three parameters, a minimum, a maximum and a value. Like so function(min, max, value).

The overflow

It takes value that can overflow the range (min + max).

Example:

overlow(1, 3, 5) === 2

This way any value you give overflow will count inside the range like so.

Range min 1, max 3:

value             range
        0  - |1  -  2  -  3|  -  4

 0           |            3|
 1           |1            |
 2           |      2      |
 3           |            3|
 4           |1            |
 5           |      2      |
... and on and on and on ...
 120961      |0            |

For a real world example you could name an array that wraps around the end, a carousel on web page or even a two dimensional world that wraps around the edges.

The clamp

It takes value and clamps it to the edges.

Example:

clamp(1, 3, 5) === 3

This way any value you give clamp will stick to the edges.

Range min 1, max 3:

value             range
        0  - |1  -  2  -  3|  -  4

 0           |1            |
 1           |1            |
 2           |      2      |
 3           |            3|
 4           |            3|
 5           |            3|
... and on and on and on ...
 120961      |            3|

The within

Returns true if a value is within the range, else false.

Example:

within(1, 3, 5) === false

The outside

Returns true if the value is outside the range, otherwise false

Example:

outside(1, 3, 5) === true

The valid

Checks all parameters, min, max and value if they are a finite number, if any of them is not then it throws a TypeError exception.

Also it checks if min is less or equal to max (min <= max), and if not it throws a RangeError exception.

This function always returns a true.

Example:

valid(1, 3, 5) === true

valid(1, '3', 5) // throws TypeError
valid(3, 1, 5) // throws RangeError

The assert

Assert checks if value is within the range, and if not it will throw an RangeError exception.

This function always returns a true.

Example:

assert(1, 3, 3) === true

assert(1, 3, 5) // throws RangeError

Unbiased benchmark results

Functions
  overflow x 223,834,804 ops/sec ±0.42% (95 runs sampled)
  clamp x 222,307,625 ops/sec ±0.32% (91 runs sampled)
  within x 223,844,303 ops/sec ±0.42% (93 runs sampled)
  outside x 222,657,700 ops/sec ±0.37% (95 runs sampled)
  assert x 221,045,434 ops/sec ±0.35% (95 runs sampled)
  valid x 220,605,742 ops/sec ±0.32% (93 runs sampled)
Fastest was overflow,within,outside,clamp

As you can clearly see from the results, that there is not much difference in speed of all these function compared to each other.

Validation + functions
  valid && overflow x 221,914,595 ops/sec ±0.42% (91 runs sampled)
  valid && clamp x 221,793,067 ops/sec ±0.33% (95 runs sampled)
  valid && assert x 200,725,337 ops/sec ±6.44% (86 runs sampled)
Fastest was valid && clamp,valid && assert

And there is no real drop in speed if you validate the input with valid or not.

Validating your input

There is no default way to validate input, choice to do so is yours to make.

Just remember to try .. catch or .catch() even.

// you could do this ..

valid(min, max, value) && overflow(min, max, value)

// or you could do that ..

if (valid(min, max, value)) {
    overflow(min, max, value)
}

// or you could do this ..

let spill = (min, max, value) =>
    valid(min, max, value) && overflow(min, max, value)

spill(min, max, value)

Or any other way is just fine.

Fastest validation method
  valid && overflow x 220,400,317 ops/sec ±0.23% (95 runs sampled)
  if valid then overflow x 220,930,642 ops/sec ±0.27% (94 runs sampled)
  spill x 202,382,744 ops/sec ±0.08% (99 runs sampled)
Fastest was if valid then overflow,valid && overflow

They are all very similar in speed, but spill seems to have a small penalty for some reason.

License

MIT