SEVEN|O node is a gateway to connect a SEVEN|O instance to Node-RED. This gateway allows to subscribe command status updates provided by SEVEN|O. Additional it is possible to use this node to send a command execution request to the SEVEN|O instance which executes the command on the connected system.
Summarized, this means it is possible to control all IoT devices connected to SEVEN|O.
Some examples are KNX, DALI, MQTT, OpenWeather, Sonos, FroniusConverter, Gardena SmartHome, Luxtronik, Balboa Spa and many more.
At first the following properties must be configured on the Gateway
Topic Command Listing
This topic is used by SEVEN|O plugin to publish a list of all available commands.
Topic Command Updates
This topic is used by SEVEN|O plugin to publish all command status updates.
Request Command Listing Endpoint
This endpoint can be used to send a request for command listing published by SEVEN|O. Command listing are usually published periodically. With this endpoint it is possible to trigger the publishing of command listing.
Request Command Execution Endpoint
This endpoint can be used to send a command execution request from Node-RED to SEVEN|O.
As soon as the gateway is configured it will estimate a connection.
In case of connection was successfully created, the node will be marked as Connected, else as Disconnected.
Command configuration / selection
As soon as the node is connected the drop down list is filled with all available commands.
As soon as a command is selected the Value type is filled with available types. If no special type is available, default is set. Value key defines different available types of the selected command.
For example if a light is selected, the value types SWITCH and DIMMER are available to select if the light should be turned on/off or if only the brightness should be changed.
MIT Licence Copyright (c) SEVEN|O - Tobias Lehmann (firstname.lastname@example.org)
Tobias Lehmann (email@example.com)